Radio programming
Send us your radios and frequency list, and they come back programmed and tested.
- Channels, tones, and zones set up to your plan
- Local repeaters and frequencies loaded for your area
- Code plugs saved so changes are quick later
Radio programming and node builds from Mineral, Virginia
We program two-way radios and build AllStarLink and Pi-Star nodes for individual radio operators. Tell us what you need and we'll get you on the air.
Request a serviceServices
Each job is set up and tested on our bench before it goes back to you.
AllStarLink nodes
Complete AllStarLink nodes on a Raspberry Pi, connected to the network and ready to use.
- Node builds and AllStarLink setup
- Audio levels and keying tuned on the bench
- Our own node board is in development
Pi-Star nodes
Digital voice hotspots built on Pi-Star, so you can reach DMR, D-STAR, and System Fusion networks from home.
- Hotspot builds and Pi-Star setup
- Network and talkgroup configuration
- Help setting up your radio to match
Need something 3D printed?
Our sister business, Zero Layer Studio, offers 3D printing services, from home decor to office solutions. If you need a part made, Zero Layer Studio can print it.
Our AllStarLink node board
We're designing a board that turns a Raspberry Pi 4B into a complete AllStarLink node. It has a UHF transceiver, USB audio, keying, and an antenna connector, so you don't need a separate radio or interface cable. A VHF version will follow.
- Schematic, done and passing electrical rules checks
- 4-layer PCB layout, done and passing design rules checks
- First prototypes, up next
- On-air testing, then release
About MultiWave Digital Labs
MultiWave Digital Labs is a radio shop in Mineral, Virginia. We program radios, build network nodes, and design our own amateur radio hardware.
Every job is handled by Adam (NU7E) and Robert (W7CTY). We program your radio, build and configure your AllStarLink or Pi-Star node, and design and build our own node hardware. We're licensed amateur radio operators who run these same systems on the air ourselves, so we set yours up the way we'd want it for our own station.
Request a service
Email us with the service you need, the radios or hardware involved, and how to reach you. We'll reply with next steps and a quote.
[email protected]